Yd5 Ni Content 10 Wc Carbide Particle 65 Nickel Base Carbide Composite Rods

Products > hard-face material > tungsten carbide copper welding rod > Yd5 Ni Content 10% Wc Carbide Particle 65% Nickel Base Carbide Composite Rods

Product name : Yd5 Ni Content 10% Wc Carbide Particle 65% Nickel Base Carbide Composite Rods

Product No. : YD5

←[Previous Product] [Next Product]→

Online Inquiry Email Us

Details:

YD5 Ni content 10% WC carbide particle 65% nickel base carbide composite rods

1.carbide copper alloy brazing rod it is made of by sintering tungsten carbide scrap and elastic matrix alloy,Outer
layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly
CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to 690MPa, hardness HB≥160.

2.Common particle sizes :1/16" x 1/8" (1.6 x 3.2 mm) , 3/16" x 1/8" (3.2 x 4.8 mm) , 1/4" x 3/16" (4.8 x 6.4 mm) , 5/16" x 1/4"
(6.4 x 7.9mm) , 3/8" x 5/16" (7.9 x 9.5 mm), 1/2" x 3/8" (9.5 x 12.7 mm).

3.length :280mm ,450mm

4. YG +CuSnZn or YG+CuSnZn+10% Ni

5.WC grit compositions : 70% ,60%,50%